Fire Hyderant System

Double Headed Hydrant

  • Technical Specifications :-

  • Size : Inlet 100mm with 63mm size two nos. female outlet

  • Material :LTB-2 of IS:318

  • Conforming Specification : IS 5290

  • Performance Test :

  • Hydrostatic (Body Test) : Tested at 21 Kgf/cm2

  • Water Tightness (Seat Test) : Tested at 14 Kgf/cm2

  • Flow Test : 1800 Liter at 7 Kgf/cm2

Single Headed Hydrant

Three way inlet1 breeching

Four way inlet breeching

  • Technical Specifications :-

  • Consist of Three nos. 63mm Size (GM) Male Instantaneous coupling as per IS:903 Complete with NRV Performance Test : Hydrostatic Test (Body Test) :Tested at 21 Kgf/cm2

  • Technical Specifications :-

  • Size : Inlet 75 / 80mm with 63mm size one no. female outlet Material : Leaded Tin Bronze of IS:318 Comforming Specification : IS 5290 Performance Test : Hydrostatic (Body Test) : Tested at 21 Kgf/cm2 Water Tightness (Seat Test) : Tested at 14 Kgf/cm2 Flow Test : 900 Liter at 7 Kgf/cm2

  • Technical Specifications :-

  • Consist of Four nos. 63mm Size (GM) Male Instantaneous coupling as per IS:903 Complete with NRV Performance Test : Hydrostatic Test (Body Test) :Tested at 21 Kgf/cm2

Aquajet multipurpose

  • Technical Specifications :-

  • Solid Jet and Fog facility simultaneously or independently

  • Special design gives low back Pressure

  • Durable light hard anodized construction

  • Straight Stream to Dense fog & flush without shut off

  • Ball Valve for flow control

  • Anti-Slop rubber molded pistol grip

  • 1/5”/2.5” male instantaneous / Storz / BSP or NH or NST threaded inlets available

  • NFPA 1964 compliant

  • Technical Specifications :-

  • Type – Jet and Fog

  • Material – Gunmetal

  • Operating Pressure – 10 bar

  • Finish – Natural Polish

  • As per IS:952

Fast-action-junior

  • Technical Specifications :-

  • Specially designed Dual Pressure Nozzle

  • At emergency mode (at low pressure), Nozzle maintains same performance

  • Durable light hard anodized construction

  • Sliding valves allow turbulence free flow

  • Straight stream to wide fog and flush without shut-off

  • Molded rubber bumper with flexible fog teeth creates thick fog pattern

  • Pistol grip handle designed for greater comfort and control to fire

  • 1/5”/2.5” male instantaneous / Storz / BSP or NH or NST threaded inlets available

Fog nozzle

Revolving branch

  • Technical Specifications :-

  • Cast bronze construction

  • Size: 65, 80 or 100 mm flanged (2.5", 3" or 4")

  • Working pressure 2.0 to 12.0 bar (30 to 175 psi)

  • Flow at 2 bar 285 to 950 lpm

  • Coverage : 10 metres in diameter at 2 bar (30 psi)

Short branch pipes

  • Technical Specifications :-

  • Size : 63 mm

  • Sizes of Nozzles : 6mm, 12mm, 15mm, 20mm and 25mm

  • Material :LTB-2 of IS:318

  • Conforming Specification : IS 903

  • Performance Test :

  • Hydrostatic (Body Test) : Tested at 21 Kgf/cm2

  • Other Range : 52 mm and 38 mm

  • Technical Specifications :-

  • Size : 63mm

  • Material of Construction : Seamless Steel Tubes

  • Comforming Specification : IS 8442

  • Performance Test :

  • • Hydrostatic Test (Body Test) : Tested at 21 Kgf/cm2

  • • Discharge at working pressure 7 Kgf/cm2 : 1750LPM

  • • Range

  • Vertical -21mtr.

  • Horizontal-53mtr.

  • Rotation :

  • Vertical : 125° min. (80° Upward and 45°downward)

  • Horizontal : 360° in either direction

Water-jet-monitor

Three way inlet1 breeching

  • Technical Specifications :-

  • Ideal for Fixed Installation

  • Made out of Carbon Steel heavy duty seamless pipe, hot dip galvanized for Corrosion Resistance

  • Design that ensures ease of operation and maintenance

  • For High Volume Monitors, Horizontal and Vertical Movement is made with the Self Locking type enclosed Geared Swivel Joints with Worm and Worm Gear using Hand Wheel that ensures smooth and easy movement during ongoing operation of Monitor.

  • Monitor is capable of Horizontal Rotation of 360 Degrees and Vertical Traverse of + 90 Degrees to -45 Degrees

  • Flanged Inlet – Dimensions as per Requirement

  • Available with variety of Nozzles – Solid Bore Jet Nozzle, Hollow Jet-Fog Nozzle and Self Inducting Aqua Foam Nozzle

  • Nozzle Material of Construction is available in Aluminium Alloy, Stainless Steel and Gunmetal

Hose box

Mobile Foam Unit

  • Technical Specifications :-

  • Size: 750 mm x 600 mm x 250 mm

  • Material :Mild Steel Sheet, Stainless Steel Sheet, Aluminium Sheet & FRP

  • Coating : P O Red Epoxy power coated

  • For accommodating 2 nos of 15 meter hose and One Branch Pipe

  • Double Door type with Locking Arrangement, Front Glass and Key

  • All sizes of Boxes / Frames fabricated as per customer specification

  • Technical Specifications :-

  • Slim line, Compact design

  • S.S.Tank

  • Low center of gravity, make steering easier

  • Mounted with Unit equipped with foam inductor, low expansion branch pipe,Fire Hoses

  • Suitable for all type of foam concentrates

  • Low Maintenance

Hose reel

  • Technical Specifications :-

  • Size : Swinging 180° Wall Mounting

  • Sizes : Inlet 20mm (¾" BSP Thread Size)

  • Material :•Hub Sides & Wall Bracket -M.S. Sheet of IS:513 • Swivel Joint -LTB-2 of IS:318 • Pipe with Fitting -Steel of IS:1239 Part I • Branch Pipe with Nozzle -IS:8090 • Hose Reel Tubing -Hydraulic Rubber Hose Conf to IS:444

  • Conforming Specification : IS 884

  • Performance Test :

  • • Hydrostatic Test : Tested at 21 Kgf/cm2 • Range & Water Flow rate test at 7 Kgf/cm2 (A) Discharge : 24LPM (B) Range (Jet Length) : 6mtr(min)

  • Present Address

  • H.No 11-13-109/2n, Plot.No.19,Margadarshi Colony, Kothapet, Hyderabad - 500102,Telangana, India.

  • Phone : 040 - 24033520.

  • Mobile : 9849010384, 9949010384.

                         9246588799,  7416093521.